Why is it so difficult for CNC lathe to process parts?

Why is it so difficult for CNC lathe to process parts?

When cutting tools in the workpiece plane and side, can adopt different cutting tool track mode, automatic lathe manufacturer called cutting mode.

The following introduction: CNC milling machine processing parts why so difficult?

Two parallel cutting track interval distance for one step cixi precision CNC lathe supply.The initial part of a cutting tool track is connected with the tail part of the other cutting tool track by stepping, and the step and cutting track are at the same level, as described below:

Reciprocating cutting of CNC grinding disc. The distance between two parallel cutting tracks is one step.The whole track, only the approach and return track.There are two kinds of reciprocating cutting methods: sequential cutting and inverse cutting

One-way cutting of nc disc.A direction of cutting is: the tool with a straight line from one end to one end of the cutting, and then take the tool back, every other step, and then from one end to the other end of the cutting, the cutting track of the same cutting direction yuyao precision CNC lathe supply.Each cutting track has a method, method, and retractor.There is only one way to cut in one direction

Automatic cutting machine control disc one-way contour cutting jinhua precision CNC lathe supply.One direction contour cutting track has three sections, long straight sections are parallel to each other, cutting in the same direction, separated by one step.There is a short cutter track at each end of the long cutting section. The shape of the short cutting tool track is the same as the contour shape of the workpiece side, which can be regarded as a straight line or curve. The span distance of the short cutting track is one step.There is a method in each track of one-way contour cutting track, which is not in the same level as the return cutter, high-speed moving cutter, the return cutter connecting the front cutting track and the return cutter connecting the back cutting track, the feed, return cutter and high-speed moving track.The short cutting tool track at both ends complements one end of the reciprocating cutting mode. The two ends of the one-way cutting mode have no defects of the tool track. Compared with the reciprocating and one-way cutting mode, the side cutting is better.